NEW... K-Drill!!!!

NEW... K-Drill!!!!

Postby Matt Johnson » Feb 25, 2013

Image

Here is the ultimate drill assembly designed for hand held cordless electric drills. Using high carbon steel chipper blades, this Drill assembly is designed specifically for re-drilling old holes. The unique centering pin greatly reduces blade jump and allows for a quick and clean hole time and time again when using permanent fish houses. The composite flutes are not designed to throw ice shavings around the inside of your fish house, but instead is designed to make it very easy to remove the ice without getting ice all over the floor.

The K-Drill has its own floatation system to prevent it from sinking down the hole if it comes detached from the drill. Requires a minimum of an 18 volt, high-torque drill for best results.

The K-Drill requires a 1/2 inch drill chuck electric drill. We've found the best drill for the job is the new Milwaukee M18. M18 drills comes with two battery packs and a charger. Each battery is capable of drilling 20 holes in 24 inches of ice.

-Cutting Speed: 1 inch per second
- Total Weight: < 10 pounds

Available in a 6" and 8" model.

For more info, please visit... K-Drill - CLICK HERE


Image
Good Fishin,
Matt Johnson
www.MattJohnsonOutdoors.com
Year-round Guided Fishing Trips
User avatar
Matt Johnson
Vexilar Pro Staff
 
Posts: 404
Joined: Aug 22, 2010
Location: Blaine, MN

Return to What's NEW at Vexilar?

Who is online

Users browsing this forum: No registered users and 1 guest

cron